A generic enclosure leaves output on the table. Atrend’s Build Your Own Box (BYOB) program designs and builds a custom subwoofer enclosure matched to your exact driver and vehicle—so you get the right port area, tuning frequency, and net internal volume, in a box that’s rigid, reliable, and built to last.
Why a Custom Enclosure Beats “One-Size-Fits-All”
- Correct net volume: Internal volume is set after accounting for driver and port displacement, so the response curve matches the driver’s intent.
- Proper port area: Sized to keep velocity in check at high output, reducing chuffing and compression while preserving low-end authority.
- Targeted tuning: We tune to the goal—e.g., ~32 Hz for deep daily bass, ~35–38 Hz for mixed genres, higher for SPL emphasis.
- Vehicle fit and orientation: Subs up/forward, vent orientation, and baffle thickness are selected for your trunk/cabin acoustics and space limits.
Materials and Construction (Built to Be Indestructible)
- High-grade MDF or birch plywood—panel thickness from 3/4″ up to and beyond 1″ depending on size and power.
- Internal bracing—window or shelf bracing to eliminate panel flex and keep output clean under power.
- Premium hardware—quality terminal cups, fasteners, adhesives, and airtight construction.
- Finishes—carpet, vinyl, stained birch, or hydrographic faceplates with clear coat to match your build.
What We Need From You
- Subwoofer details: brand, model, size, driver displacement (if available).
- Vehicle constraints: max width/height/depth, preferred orientation, seat/trunk pass-throughs.
- Power and goals: amplifier power, music style, SQ vs SPL priorities, desired tuning (if any).
- Finish preferences: material, color, faceplate options, terminal location.
Our Design Process
- Blueprint: We translate your specs into a design with target net volume, port geometry, and tuning.
- Review: You approve dimensions, orientation, cutout sizes, and finish.
- Build: Panels are CNC-cut, assembled with bracing, sealed, and finished.
- Ship: Packed for protection and delivered ready to install. (Typical build-and-ship timelines are fast; ask for current lead time.)
When BYOB Makes the Biggest Difference
- High-output systems that need large, quiet ports and reinforced structures.
- Space-limited vehicles where precise dimensions and orientation are critical.
- Specific drivers (e.g., unique Fs/Qts/Vas or square cones) that require tailored volume/tuning.
- Show builds where finish quality and faceplates matter as much as performance.
Compare: BYOB vs. Generic Boxes
| Feature | BYOB (Atrend) | Generic Box |
|---|---|---|
| Net volume | Calculated for your driver and application | Approximate, may be off after displacement |
| Port area & tuning | Sized to keep velocity low; tuned to goals | Often undersized/untuned (noisy, peaky) |
| Materials & bracing | MDF or birch 3/4″–1″+, reinforced | Thinner panels, minimal bracing |
| Vehicle fit/orientation | Designed to your trunk/cabin | One-size-fits-most |
Ready to Start Your Design?
Tell us your sub, vehicle, and goals—we’ll handle the rest.
Related Atrend Resources
Conclusion
A proper enclosure transforms your system. With Atrend’s BYOB program, you get a box engineered to your exact driver and vehicle, with the right volume, port area, and tuning—built from high-grade MDF or birch with internal bracing. It’s the most reliable way to unlock the performance your subwoofer was designed to deliver.